Filter
Top Products
18. SUPPLEMENTARY SERVICES
313
LZT 123 7263 R1C
18.8 AT*ELIN Ericsson Line Set
This command requests the ME to set the current line to <line>.
Note! The following command reads its value from the current line and is thus
affected by the use of *ELIN:
AT+CACM - Accumulated Call Meter
18.9 AT*E2SSD M2M Supplementary Service Dispatch
This command allows the user to send a Public MMI command string
in order to activate, deactivate, interrogate or modify settings for
Supplementary Services.
Once a string is sent, the command will return OK if parsed and sent
successfully, otherwise ERROR is returned. The command does not
verify that the operation executes successfully - use the AT*E2SSI
command to gain feedback of the operation status.
Description Command Possible Responses
Set the current line to
<line>
AT*ELIN=<line> •*ELIN: <line>
• +CME ERROR: <err>
•OK
•ERROR
Show the current
setting
AT*ELIN? •*ELIN: <line>
• +CME ERROR: <err>
•OK
•ERROR
Show if the command
is supported
AT*ELIN=? • *ELIN: list of
supported <line>s
+CME ERROR: <err>
•OK
•ERROR
<line> Description
1 L1
2 L2
Description Command Possible Responses
Send Supplementary
Service command
AT*E2SSD=<SS_String> •OK
•ERROR
Show if the command
is supported
AT*E2SSD=? •OK
•ERROR