Filter
Top Products
183
LZT 123 7263 R1C
10. Identification
10.1 AT Attention Command
This command is used to determine the presence of an MS. If the MS
supports AT commands, it returns an OK final result code.
10.2 AT&F Set to Factory Defined Configuration
This command instructs the DCE to set all parameters to default values
specified by the manufacturer, which may take in consideration
hardware configuration and other manufacturer defined criteria.
10.3 AT&W Store User Profile
This command stores the current user profile in non-volatile memory.
Description Command Possible Responses
Checks the communication
between the MS and
application
AT •OK
• +CME ERROR <err>
Description Command Possible Responses
Execute AT&F •OK
•ERROR
Show if the command
is supported
AT&F=? &F: (list of supported
<profile>s)
Description Command Possible Responses
Stores the current user
profile to non volatile
memory
AT&W=[<pr>] or
AT&W[<pr>]
•OK
•ERROR
Show if the command
is supported
AT&W=? &W: (list of supported
<pr>s)
< pr> Description
0 Stores current settings in User Profile 0