Filter
Top Products
13. NETWORK
211
LZT 123 7263 R1C
13.2 AT*E2EMM Ericsson M2M Engineering Monitoring Mode
Description Command Possible Responses
Set the
response
presentation
mode
AT*E2EMM=
<n>[,<m>]
•ERROR
•OK
Display mode
neighbour cells
are taken from
the toplist
*E2EMM:
Serving Cell
MCC,MNC,LAC,CellID,BSIC,Ch[,RxL,C1,
C2][,RxLFull,RxLSub,RxQFull,RxQSub,TA,T
N],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>
[,<rxl>,<c1>,<c2>][,<rxlFull>,<rxlSub>,
<rxqfull>,<rxqsub>,<ta>,<tn>],
NeighBours Cells
MCC,MNC,LAC,CellID,BSIC,Ch,RxL[,C1,
C2],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
…
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
OK
Compact mode.
The first cell is the
serving cell, the
rest are
neighbour cells
taken from the
toplist
*E2EMM: <mcc>,<mnc>,<ci>,
<bsic>,<ch>[,<rxl>][,<rxlSub>,<rxqsub>,
<ta>],<mcc>,<mnc>,<ci>,<bsic>,<ch>,
<rxl>,
<mcc>,<mnc>,<ci>,<bsic>,<ch>,<rxl>,
…
<mcc>,<mnc>,<ci>,<bsic>,<ch>,<rxl>
OK
Verbose mode.
The first cell is the
serving cell and
the rest are
neighbour cells
as provided by
the network in
the system info.
messages (2 and
5) and via the
AT*E2NBTS
command
*E2EMM: <mcc>,<mnc>,<lac>,
<ci>,<bsic>,<ch>[,<rxl>,<c1>,<c2>]
[,<rxlFull>,<rxlSub>,<rxqfull>,<rxqsub>,
<ta>,<tn>],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
…
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
OK
Reduced display
mode - info. as
display mode but
without text
headings or
<CR><LF>
separators,
neighbour cells
from top list
*E2EMM: <mcc>,<mnc>,<lac>,
<ci>,<bsic>,<ch>[,<rxl>,<c1>,<c2>]
[,<rxlFull>,<rxlSub>,<rxqfull>,<rxqsub>,
<ta>,<tn>],
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
…
<mcc>,<mnc>,<lac>,<ci>,<bsic>,<ch>,
<rxl>[,<c1>,<c2>]
OK
Show the current
setting
AT*E2EMM? • *E2EMM: <n>
•ERROR
Show if the
command is
supported
AT*E2EMM=
?
• *E2EMM: (list of supported <n>s),(list
of supported <m>s)
•ERROR