Sony Ericsson GM48 Cell Phone User Manual


 
GM47/GM48 INTEGRATOR’S MANUAL
226
LZT 123 7263 R1C
13.13 AT+COLP Connected Line Identification Presentation
This command refers to the GSM/UMTS supplementary service COLP
(Connected Line Identification Presentation) that enables a calling
subscriber to get the connected line identity (COL) of the called party
after setting up a mobile originated call. The command enables or
disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
<numberx> Description
String type Phone number of format specified by <typex>
<typex> Description
Integer format Type of address, (refer to GSM 04.08 subclause 10.5.4.7)
<speed> Description
data rate As defined in subclause 6.7 GSM 07.07
<service> Description
0 Asynchronous modem
4 Voice
5 Fax
<itc> Description
0 3.1kHz
1 UDI
Description Command Possible Responses
Request connected
line identification
presentation
AT+COLP=[<n>] •OK
•ERROR
Show the current
setting
AT+COLP? +COLP: <n>,<m>
•OK
•ERROR
Show if the command
is supported
AT+COLP=? +COLP: (list of
supported <n>s)
•OK
•ERROR