Sony Ericsson GM48 Cell Phone User Manual


 
GM47/GM48 INTEGRATOR’S MANUAL
290
LZT 123 7263 R1C
17.3 AT*E2STKD M2M STK Display Text
The ME passes the parameters within DISPLAY TEXT command to
the external application by means of the unsolicited result code
*E2STKD.
Command AT*E2STKD allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
Test command returns the list of supported <answer>. Values follow
GSM 11.14 standard
Unsolicited Result Codes:
*E2STKD: <priority>,<clear_condition>,<coding>,<text_length>,
<text>
Description Command Possible responses
Answer to the
reception of
DISPLAY TEXT
AT*E2STKD=<answer> +CME ERROR <err>
•OK
•ERROR
Show if the
command is
supported
AT*E2STKD=? •*E2STKD:
(list of supported <answer>)
+CME ERROR <err>
•OK
•ERROR
<answer> Description
0 OK.
Performed as required: the text was displayed and
cleared as requested. It corresponds to ‘00’ Command
performed successfully, described in the GSM standard
1 Failed.
User Terminated Session: the text was displayed as
requested and the user wants to end the proactive
session. It corresponds to ‘10’ Proactive session terminated
by the user, described in the GSM standard
2 Failed.
User requests backwards move: the text was displayed as
requested and the user wants to go backwards in the
session. It corresponds to ‘11’ Backward move in the
proactive SIM session requested by the user
3 Failed.
No response from user: the text was displayed, and
although the clear condition was “Wait for user to clear”,
the user did not react. It corresponds to ‘12’ no response
from user
4 Failed.
Screen is busy: the text could not be displayed