Sony Ericsson GM48 Cell Phone User Manual


 
GM47/GM48 INTEGRATOR’S MANUAL
298
LZT 123 7263 R1C
17.7 AT*E2STKM M2M STK Set Up Menu
The ME passes the parameters within SET UP MENU command to the
external application, so that the STK menu can be built externally, by
means of the unsolicited result code *E2STKM.
The current menu can be removed by sending only the parameter
<on_off> = 0.
Answer command allows the external application to send the
appropriate answer after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
Values follow GSM 11.14 standard.
Description Command Possible responses
Answer to the
reception of SET
UP MENU
AT*E2STKM=<answer>,
<on_off>
+CME ERROR <err>
•OK
ERROR
Show if the
command is
supported
AT*E2STKM=? *E2STKM: (list of supported
<answer>),(list of supported
<on_off>)
+CME ERROR <err>
•OK
ERROR
<answer> Description
0 OK.
Performed as required: it corresponds to ‘00’ command
performed successfully, described in the GSM standard
1 Failed.
User Terminated Session: the command was executed as
requested and the user wants to end the proactive
session. It corresponds to ‘10’ proactive session terminated
by the user, described in the GSM standard
2 Failed.
User requests backwards move: the command was
executed as requested and the user wants to go
backwards in the session. It corresponds to ‘11’ backward
move in the proactive SIM session requested by the user
3 Failed.
No response from user: the command was executed, and
the user did not react. It corresponds to ‘12’ no response
from user
4 Failed.
Screen is busy
5 Failed.
Command beyond MEs capability. It corresponds to ‘30’.
It was not possible to successfully integrate or remove the
list of menu items