Sony Ericsson GM48 Cell Phone User Manual


 
GM47/GM48 INTEGRATOR’S MANUAL
88
LZT 123 7263 R1C
+CMGS: 204 Confirmation that the SMS has been sent
sdfjldjfl successfully
OK
Note the following points:
1. Once the CSDH, CSMP and CMGF commands have been carried
out they will not need to be initialized for this session.
2. These parameters are saved in NVRAM using the &W command.
Notification of SMS
New message indications are similar to the PDU mode as shown below:
AT+CNMI=3,1
OK
+CMTI: “SM”,2
AT+CNMI=3,2
OK
+CMT: “+447747008670”,“Matt
L”,“02/11/19,09:58:42+00”,145,36,0,0,“+447785016005”
,145,8
Test sms
Please note that currently the CMT indication does not have a CR/LF
appended to the end of the SMS data. If the SMS contains one it will be
displayed. Otherwise the application will need to recognize the CMT
line and the length character, in this case 8 and count the characters into
its input buffer.
Reading messages
Reading messages is performed as in PDU mode.
AT+CMGR=2
+CMGR: “REC UNREAD”,“+447747008670”,“Matt L”,“02/11/
19,09:57:28+00”,145,36,0,0,“
+447785016005”,145,8
Test sms
OK
Listing messages
In PDU mode numbers are used as parameters. In text mode letters are
used instead and these must be upper case as the module does not accept
lower case commands. See the example below: