A SERVICE OF

logo

1
Sony-Ericsson T610 Bluetooth Connections
You can use the Microsoft
®
Wireless Transceiver for Bluetooth
®
to transfer les, contacts, and other information
between your Sony-Ericsson T610 mobile phone and your computer. For this to work correctly, you must rst
congure the computer and mobile phone to communicate with each other.
This document will help you congure your computer and your mobile phone to communicate over a Bluetooth
connection, and step you through synchronizing your data.
These instructions assume that:
You have already set up and congured your Microsoft Wireless Transceiver for Bluetooth on your
computer.
You have the Sony-Ericsson Communication Suite CD-ROM, or you have downloaded the latest version of
Communication Suite 1.5.9 from the Support area at http://www.sonyericsson.com.
You are running Microsoft Windows
®
XP with Service Pack 2 installed.
To congure your phone for Bluetooth connections
1 Press Menu, press Connect, press Bluetooth, and then press Options.
2 Select Visibility, and then choose Show Phone.
3 (Optional:) Select Edit Phone Name, and then enter a custom name for the mobile phone.
4 Press Back to return to Bluetooth, and then select Turn On.
To add your mobile phone to Windows as a Bluetooth device
1 On your computer, click Start, click Control Panel, click Printers and other Hardware, and then click
Bluetooth Devices.
2 On the Devices tab, click Add.
3 Follow the instructions in the Add Bluetooth Device Wizard to install your mobile phone. When prompted,
you will need to enter a passkey on your mobile phone to accept the connection from your computer.
4 On the Finish screen of the wizard, make a note of the incoming COM port assigned to your phone’s
Bluetooth connection. You will use this information to congure your phone synchronization software in
the following procedure.
To install the Communications Suite and XTNDConnect PC
The Sony-Ericsson Communications Suite is a collection of programs that your mobile phone uses to interact
with your computer in various ways. XTNDConnect PC is used specically to synchronize your e-mail client, such
as Microsoft Outlook
®
, with the corresponding applications on your mobile phone.
1 On your computer, start the Communication Suite installation from the CD-ROM or by double-clicking
the .exe le downloaded from the Web.
2 Follow the setup instructions to install the Communication Suite and XTNDConnect PC on your computer.
Restart your system when prompted.
3 After Windows has restarted, click Start, click Control Panel, and then click Phone Monitor Options.
4 Click the COM Ports tab.
5 Select the COM port that you wrote down earlier, and then select Enable.
6 Click OK to save your changes.
To synchronize your e-mail content, click Start, point to All Programs, point to Sony Ericsson, and then click
Start Outlook Synchronization.
M