-33-
MODULE
LINE/TRUNK
STATION TYPE
SPECIFICATIONS
TYPE
408*
L00p-start
Analog multiline
Capacity: 4 lines/trunks, 8 stations.
telephone; Call IPFT telephone
Management System;
Station signaling: analog multiline
PFT telephone
telephone (40 kbps)
Line/trunk signaling: Loop-start line/
trunk: analog voice
Loop range: 1000 ft.. in-building and
in-range out-of-building (with analog IROB
protectors) servicc only
408 GS/LS
Loop-start or
Analog multiline telephone;
Capacity: 4 lines/trunks, 8 stations.
ground-start
Call Managemcnt System:
1 PFT telephone
PFT telephone
Station signaling: analog multilinc
telephone (40 kbps)
Line/trunk signaling: Loop-start line/
trunk (optional per port): voice
Loop range: 1000 ft. in-building and
in-range out-of-building (with analog IROB
protectors) service only
800*
Loop-start PFT telephone
Capacity: 8 lines/trunks, 2 PFT
telephones
Signaling:R loop-start
800 DID Direct Inward
n/a
Capacity: 8 trunks. 2 TTRs
Dialing
Transmission:
incoming calls only;
2-way (l-pair) fixed impedance to DID
trunks; no outgoing calls
Signaling loop-reverse battery;
wink-start or immediate start; accepts
touch-tone dialing
800 GS/LS Loop-start or
PFT telephone; button
Capacity: 8 lines/trunks. 2 PFT
ground-start
needed for Ground-start PFR
telephones
. .
Signaling Loop-start or ground-start
* Note: Although these MERLIN II module are supported in the MERLIN LEGEND Communications System. the 400 GS/LS. 408
GS/LS. and the 800 GS/LS are the recommended modules for use in the LEGEND system.