Filter
Top Products
20
To Recharge Battery
Your CDM-9100 phone has a built-in charger function.
To recharge the Battery Pack, always install the Bat-
tery Pack to the phone.
1. Attach the BTR-9100 Battery Pack to the phone.
2. If the phone is on with the
indicator displayed,
press and hold
to turn the phone off.
3. Insert the connector of the CNR-9100 AC Adapter
to the phone connector.
4. Plug the AC Adapter to AC120V outlet.
5. Then the recharging starts. The phone displays
“Now Charging” with ani-
mation and the
indica-
tor scrolling. It also lights the
Charging Indicator at the top
of the phone.
6. When recharging is completed, the phone displays
“Fully Charged!”.
7. Disconnect the AC Adapter from the outlet.
8. To disconnect the AC Adapter from the phone, hold
the buttons to unlatch and pull the connector off.
The recharging time, from empty to full, depends on
the environmental temperature, 0 to +35 °C.
Now Charging
Recharging Time
1.5 to 2 h
Battery Type
Lithium Ion Battery Pack (BTR-9100)
Notes: 1. For complete recharging, it is recommended
that the phone be turned off during recharg-
ing.
2. It is normal for the battery to become a little
warmer during recharging.
3. Do not feed power to the phone without the
battery pack attached.
AC Adapter
CNR-9100
Buttons to unlatch
CDM-9100
AC120V