Filter
Top Products
rrogrammlng I ne Hrrenaanr Pearures
Setting The Night Transfer
Of
Ringing Mode
The
day (or normal) ringing assignments of incoming lines can be trans-
ferred to a particular station or stations for off-hour or special purpose
answering (such line/station ringing assignments are made through
class of service programming). Additionally, stations can be arranged
through class of service programming to answer any ringing outside
line. The ability to answer a line from any station is also enabled
through the night transfer of ringing mode.
To set the night transfer mode,
l press
ITCM,
l dial+#OO,
l press
Al
(top, left-hand programmable button) to alternate the fea-
ture between on and off,
q
l dial
1
to enable,
l dial 2 to disable,
Note: Associated light will turn on when night tran&er is active and will turn off
when the feature is disabled.
l press
SPKR
to end.
Because Night Transfer is a commonly used feature, you may wish to
program a button to serve as the Night Transfer button.
To do this,
l press
ITCM,
l dialS+l,
l press one of the programmable buttons,
l press
ITCM,
l dial+k#OO,
l press
SPKR
to end.
To set the Night Transfer Of Ringing mode, simply press the Night
Transfer button you’ve programmed. To return ringing to the
attendant’s station, press the Night Transfer button again.
12