Filter
Top Products
Not for commercial use – Ericsson Inc.
Basic Operations 19
Setting the Ring Volume
To select the ring volume for your mobile phone:
Press
MENU
from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.
Press 1 to display the Sounds submenu.
Press 1 to display the Ring Volume submenu.
Press the or repeatedly until the appropriate ring
volume is highlighted. You will hear two ring cycles of
the currently selected ring volume as you scroll
through each ring volume selection.
When the appropriate ring volume is highlighted,
press
YES
.
Press
NO
to return to the previous screen or press
CLR
to return to the Standby screen.
Emergency Calls
Your phone was programmed with an emergency num-
ber (911) when it was manufactured. The programmed
emergency number can be dialed and called at any time,
if there is any emergency system available. A representa-
tive from your service provider or the retail outlet where
you purchased your phone should be able to change the
emergency number in your phone if a 911 system is not
available in your service area.
Note! Auto Key Lock allows emergency (911) number access.
Unlock Auto Key Lock by pressing MENU and then *.
If police, fire, or medical help is needed, dial 911 or your
emergency number and press
YES
. Tell the dispatcher
that you are calling from a wireless phone. Wireless 911
calls do not automatically provide emergency personnel
with your name, location, or phone number. The dis-
patcher will want to know the following:
Your name and wireless phone number.
The nature of the emergency.
If police, fire, or medical assistance is needed.
The exact location of the emergency, including cross
streets, mileposts, or landmarks.
How many people are involved, their condition, and if
help is being administered.
System Dependent Network Features
Network Search
Your phone should be configured by your service pro-
vider for optimal network selection during roaming. If
you want and your service provider allows, you can over-
ride the preconfigured selection by doing the following:
Press
MENU
from the Standby screen to access the main
menu.
Press 4 to display the SETTINGS Menu.