Filter
Top Products
Installing the Battery Pack
The Dolphin 6000 is shipped with the battery packaged separately
from the terminal. Perform the following steps to install the battery.
1. Slide the latch to unlock the battery door.
2. Open the battery door.
3. Insert the battery into the battery well with the contacts facing
the front of the unit.
4. Re-install the battery door.
Note: Install the battery door before powering the terminal.
5. Connect the terminal to one of the Dolphin 6000 charging
peripherals to charge the battery pack.
Ensure all components are dry prior to mating terminals/batteries
with peripheral devices. Mating wet components may cause dam-
age not covered by the warranty.
We recommend use of Honeywell Li-Ion battery packs. Use of any
non-Honeywell battery may result in damage not covered by the
warranty.
!
!