Filter
Top Products
REV.
Issued Date 2008/7/2
.
Revised Date 2008/12/01
A10
Doc. Title
Raphael Service Manual
Page 30 of 98
HTC CONFIDENTIAL
SM-TP001-0704
HTC Corporation
1. ASSEMBLE THE NAVI KEY AND
TIGHTEN 2 SCREWS AT THE LOCATION
INDICATED (P/N: 72H02450-00M).
TORQUE: 0.5 ±0.1 KGF-CM
2. TIGHTEN 4 SCREWS AT THE LOCATION
INDICATED (P/N: 72H02689-00M).
TORQUE: 0.7 ±0.1 KGF-CM
1. ASSEMBLE THE NAVI KEY CAP AS
SHOWN. PRESS THE KEY CAP FIRMLY.
2. REMOVE ALL OF THE MYLAR AFTER
ASSEMBLY PROCESS IS DONE.
NOTE: DO NOT TOUCH THE DOUBLE SIDED
TAPE & FPC AREA WHILE ASSEBLE THE
NAVI KEYCAP AND MAKE SURE THE
SURFACE OF THE NAVI KEY FPC IS CLEAN.
NOTE:
3. PLEASE PASTE MYLAR NO. 2 & 3 AT
THE LOCATION INDICATED IF THERE IS
NO MYLAR ON THE BEZEL
4. CLEAN THE NAVIKEY FPC SURFACE
WITH LABORATORY ALCOHOL (95%
AND UP) WHILE DOING KEYCAP
REWORK.