Filter
Top Products
Doc. No. DOC-00044120 REV.
Issued Date 2008/07/17
.
Revised Date 2009/01/15
A03
Doc. Title
Converse Service Manual
Page 60 of 78
HTC CONFIDENTIAL
SM-TP002-0706
HTC Corporation.
6.3 Main unit inspection
GAP & STEP INSPECTIONS
Description
Accept Criteria
1. Gap between ME parts.
1.5 (mm)
2. Stylus
Stylus assembly protruding, loose, missing, falling and
deformed is not allowed.
3.
Others, refer to production
release spec
Others, refer to production release spec
OTHERS
Scratch
Description Accept Criteria
Class A
Exposure of substrate do not accept
Scratch : L4mm ,W 0.2mm ,N 2, S10mm
MI
Class C
Label area don’t care
Exposure of substrate do not accept
Scratch : L10mm ,W 0.4mm ,N 5, S5mm
MI
Contamination dot/Granule dot/Cave granule
Description Accept Criteria
Class A D 0.5mm ,N2,S 15 mm (Ignored if D D 0.15mm) MI
Class C D<0.9mm ,N4,S 10 mm MI
Burr
Description Accept Criteria
Burr. Don’t accept hand scrape MI
Imprint mark
Description Accept Criteria
Class A 0.25 diameter0.65mm ,N 3 MI
Bright mark
Description Accept Criteria
Class A L 2.5mm,W0.25mm,N 3 MI
Class C L 3.0mm,W0.3mm,N 5 MI
Lint
Description Accept Criteria
Class A L 3mm , W0.2mm ,N 2, S 5 mm MI
Class C L 10mm , W0.3 mm ,N 3 MI