Filter
Top Products
30
7 Getting Connected
7.1 Mobile Networks
Your mobile phone will be automatically configured to use your network operator's
2G/3G service (if available) when you turn on the phone for the first time. Note that the
SIM/UIM card must be inserted (some CDMA mobile phones have an integrated UIM
card and do not need a separate UIM card)
7.1.1 Checking the Network Connection
1. Touch >
Settings
.
2. Under
WIRELESS & NETWORKS
, touch
More...
>
Mobile networks
.
3. Touch
Network operators
or
Access Point Names
to check the network
connection.
Your phone will automatically read the access point settings from the SIM/UIM
card (if any). Therefore, do not change the access point parameters; otherwise,
you might not be able to access network resources.
7.1.2 Turning On the Data Service
1. Touch >
Settings
.
2. Under
WIRELESS & NETWORKS
, touch
More...
>
Mobile networks
.
3. Select the
Data enabled
check box to turn on the data connection.
If you do not need to access a wireless data network, you can clear the
Data
enabled
check box to save data traffic costs.
7.2 Wi-Fi
Wi-Fi gives you wireless access to broadband Internet. To use Wi-Fi on your mobile
phone, you must have an access to wireless access points (hotspots). Obstacles that
block the Wi-Fi signal will reduce its strength.