Filter
Top Products
V4 ENGLISH 14-0827
SELECTING THE MODE SOURCE
• Press SOURCE repeatedly to select FM, Dock, or AUX. The source you
select appears on the display.
VOLUME CONTROL
• After you select the mode you want, press Volume Up or Volume
Down to set the volume to a comfortable level.
SETTING PRESETS
You can store up to 20 preset stations.
1 Tune to the desired station using the / buttons.
2 Press and hold the Preset button. The Preset indicator begins blinking.
3 Press / buttons to select the desired Preset number, then press
Preset. The display returns to the clock and the station is stored.
SETTING THE ALARM
1 Press the Alarm button to select the alarm music source
(Dock/Radio/Buzzer) or close the alarm.
If you select Dock, make sure your iPod/iPhone is placed in the dock.
If you select Radio, the alarm will be the last radio station you listened to.
2 Press and hold Alarm 1 or Alarm 2 until the hour blinks on the
display.
3 Press Volume Up/Volume Down or Previous/Next to set the hour.
4 Press the Alarm 1 or Alarm 2 button again. The minutes blink on the
display.
5 Press Volume Up/Volume Down or Previous/Next to set the
minutes. To nish setting the alarm, press the Alarm 1 or Alarm 2
button again, or wait for ten seconds until the display returns to
normal. The alarm icon is displayed with the selected source.
6 To turn the alarm o, press the Alarm button repeatedly until there is
no source displayed next to the alarm icon on the display.
SYNCHING THE TIME WITH AN IPHONE
1 Place your iPhone in the docking station.
2 Press the Clock/Sync button. The logo briey appears on the
display and your clock radio will sync the time with iPhone
automatically.
PLAYING MUSIC FROM AN EXTERNAL SOUND
SOURCE
To play music from an external source:
1 Plug an audio cable with a 3.5 mm plug (not included) into the AUX IN
jack on the back of your clock radio and into your external sound source,
such as an MP3 player.
2 Turn on your clock radio, then press the SOURCE button repeatedly
until AUX appears on the display.
3 Control playback from your external sound source.
TROUBLESHOOTING
MAINTAINING
• To prevent re or shock hazard, disconnect your clock radio from the AC
power source when cleaning.
• The nish on your clock radio may be cleaned with a dust cloth and cared
for as other furniture. Use caution when cleaning and wiping the plastic
parts.
• If the front panel becomes dirty or smudged with ngerprints it may be
cleaned with a soft cloth slightly dampened with a mild soap and water
solution. Never use abrasive cloths or polishes as these will damage the
nish of your clock radio.
Caution:
• Never allow water or other liquids to get inside your clock radio.
• Modifying or tampering with the internal components of your clock radio
can cause a malfunction and might invalidate its warranty. If your clock
radio is not performing as it should, take it to the local dealer for assistance.
SPECIFICATIONS
• Total RMS power: 2 W @1kHz, @ 10% THD
• Total peak power: 4 W
• Signal-to-noise ratio: ≥ 65dB
• Frequency response: 250Hz - 18kHz
• Speakers: 1.57" × 1.57" full range (40 × 40 mm)
• Dimensions (W × D × H): 9.92 × 3.05 × 4.11 in.
252 × 77.5 × 104.5 mm
LEGAL NOTICES
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user’s authority to operate
this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designated to connect specically to
iPod, iPhone respectively, and has been certied by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this devise or its compliance with safety and regulatory standards. Please note that the
use of this accessory with
iPod or iPhone may aect wireless performance. iPod, and iPhone are trademarks of Apple Inc. registered in the U.S. and
other countries.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
PROBLEM:
My clock radio won’t turn on.
No sound.
My clock radio will not play
in FM mode.
FM radio reception sounds
distorted or fuzzy.
My iPod/iPhone won’t play.
My external audio device
(MP3 player) won’t play.
My iPod/iPhone won’t
charge when it’s docked.
SOLUTION:
• Make sure that the power cord is fully inserted in the power
outlet and rmly connected to the DC IN jack on the back.
• Make sure that power is connected and your clock radio is
turned on.
• Make sure your external device is turned on and is playing.
• Make sure the volume on your external device is turned up and
is not set to mute.
• Make sure that the volume on your clock radio is not extremely
low.
• Repeatedly press the SOURCE button to select FM mode.
• Make sure that the clock radio is correctly tuned to an FM
station.
• Move your clock radio closer to a window to improve reception.
• Make sure your iPod/iPhone is on and charged.
• Repeatedly press the SOURCE button to select Dock mode.
• Make sure your iPod/iPhone is not paused.
• Make sure that your iPod/iPhone is properly docked.
• Make sure that there are songs in your iPod/iPhone.
• Make sure that your iPod/iPhone is working properly before you
dock it into your clock radio.
• Remove your iPod/iPhone from the docking compartment.
Clean the connectors in the docking compartment and on your
iPod/iPhone, then replace it in the docking compartment.
• Your iPod/iPhone software may be outdated. Upgrade its
software. For details, visit www.apple.com.
• You need to use the controls on your MP3 player to control
playback.
• Make sure your external device is on and charged.
• Repeatedly press the SOURCE button to select AUX mode.
• Make sure your external device is not paused.
• Make sure the audio cable is fully inserted into the external
device and the AUX IN jack on the clock radio.
• Make sure that there are songs in your external device.
• Make sure that your external device is working properly before
you connected it to your clock radio.
• Make sure that your iPod/iPhone is properly docked.
• Make sure that your iPod/iPhone battery is not faulty.
• Make sure that the power cord is plugged in.
NS-CLIP02_14-0827_QSG_V4_EN.ai 2 8/7/2014 7:36:37 AMNS-CLIP02_14-0827_QSG_V4_EN.ai 2 8/7/2014 7:36:37 AM