Filter
Top Products
6.1 Paired Devices
Pairing is the process that allows the handset to
locate, establish and register 1-to-1 connection with
the target device.
For pairing new Bluetooth
®
device
1. Press Left Soft Key , , , .
2. Follow the
Bluetooth
accessory instructions to set
the device to pairing mode.
3. Press for Paried Devices and press the Left
Soft Key for
Search
. Select New Search and
press .
4. If
Bluetooth
power is set to off, you will be
prompted to turn power on. Select Ye s and
press .
5. The device will appear in the Found Devices menu
once it has been located. Highlight the device and
press .
6. The handset will prompt you for the passkey.
Consult the
Bluetooth
accessory instructions for
the appropriate passkey (typically “0000” - 4
zeroes). Enter the passkey and press .
Phone does not support
Bluetooth
OBEX Profiles.
7. Once pairing is successful, select Yes and
press to connect with the device.
8. Once connected, you will see the device listed in
the Paired Devices menu and the
Bluetooth
connected icon will show up on your idle
screen.
6.2 Power
Allows you to set the power On/Off.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On
/
Off
SETTINGS
72
SETTINGS
Note
By default, your device’s
Bluetooth
functionality
is turned off.
AX245_Eng_new.qxd 2006.9.30 11:56 AM Page 72