Filter
Top Products
You can use the access codes described in this section to avoid
unauthorised use of your phone. The access codes (except PUK1 and
PUK2 codes) can be changed by using [Menu 4-5-6].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card
against unauthorised use. The PIN code is usually supplied with the SIM
card. When PIN code request is set Enable, your phone will request the
PIN code every time it is switched on. On the contrary, when PIN code
request is set Disable, your phone connects to the network directly
without the request PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to access some
functions such as Advice of call charge, Fixed Dial number. These
functions are only available if supported by your SIM card.
PUK code (4 to 8 digits)
The PUK(PIN Unblocking Key) code is required to change a blocked PIN
code. The PUK code may be supplied with the SIM card. If not, contact
your local service provider for the code. If you lose the code, also contact
your service provider.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is required to change a
blocked PIN2 code. If you lose the code, also contact your service
provider.
Security code (4 to 8 digits)
The security code protects the unauthorised use of your phone. It is
usually supplied with the phone. This code is required to delete all phone
entries and to activate “Reset settings” menu. The default number is
“0000”.
ENGLISH
24
Access Codes
Getting Started