77
VX3200
76
VX3200
Display (Menu )
Options to customize the phone’s display screen.
Banner (Menu )
Allows you to enter a string of up to 16 characters which display
on the LCD screen.
1. Press , , , .
2. Enter you banner text then press .
Backlight (Menu )
Allows you to set the duration for illuminating the backlight.
Main LCD, and Key Light Timer are set separately.
1. Press , , , .
2. Choose a Backlight sub-menu and press .
Main LCD / Key Light Timer
3. Choose a setting and press .
Timer / Brightness
If an amount of time is set for the timer option, the time starts
after the last key was pressed.
Main LCD (Menu )
Timer Options
●
7 seconds
●
15 seconds
●
30 seconds
●
Always on means that the backlight is always on.
●
Always off means that the backlight is never on.
Using Phone Menus
Using Phone Menus
Power On/Off Tone (Menu )
Allows you to set the phone to sound a tone when the phone is
powered on, powered off, or both.
1. Press , , , .
2. Set your selection with .
3. Press to save the setting.
DTMF Length (Menu )
Allows you to set the Key Tone length and touch tone playback
speed.
1. Press , , , .
2. Select either of the following then press .
Normal Sends out a tone for a fixed period of time even
if you keep the key pressed.
Long Sends out a continuous tone for as long as you
keep the key pressed.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will extend
the DTMF tone.
revised VX3200-(E)small.QXD 4/22/04 8:48 AM Page 76