Filter
Top Products
Getting Started with Your Phone
17
Getting Started with Your Phone
The Battery
Installing the Battery
Remove the battery cover, insert
the battery into the opening by
first aligning the bottom of the
battery with the terminals near
the bottom of the phone. Align
the battery cover over the
battery then slide it slightly
upward until it clicks into place.
Removing the Battery
Turn the phone off. Slide the
battery cover downward and
remove it. Use the opening near
the top of the battery to lift the
battery out.
Charging the Battery
Warning! Use only the charger
provided with the phone. Using
any charger other than the one
included with the UX145 may
damage your phone or battery.
1. Plug the end of the adapter
into the phone’s charger port
and the other end into an
electrical outlet.
2. The charge time varies depending
upon the battery level.
Battery Charge Level
The battery charge level is shown at
the top right of the LCD screen.
When the battery charge level
becomes low, the low battery sensor
alerts you in three ways: sounding
an audible tone, blinking the battery
icon, and displaying a warning
message. If the battery charge level
becomes exceedingly low, the phone
automatically switches off and any
function in progress is not saved.
Note
It is important to fully charge the
battery before initial use of the
phone.