Filter
Top Products
VX8700 67
SETTINGS & TOOLS
3.1 Add New Device
Pairing is the process that allows the handset to
locate, establish, and register 1-to-1 connection
with the target device.
For pairing with a new Bluetooth
®
device
1. Follow the Bluetooth
®
accessory instructions to
set the device to pairing mode.
2. Press [MENU] -> press the Navigation Key
downward to select SETTINGS & TOOLS
and press -> press [Bluetooth Menu]
-> press [Add New Device].
Set the desired device to pairing.
3. If Bluetooth
®
power is set to off, you will be
prompted to turn power on. Select Yes and
press .
4. The device will appear in Add New Device
menu once it has been located. Highlight the
device and press .
5. The handset will prompt you for the passcode.
Consult the Bluetooth
®
accessory instructions
for the appropriate passcode (typically “0000”
- 4 zeroes). Enter the passcode and press .
6. Once pairing is successful, select either Always
Ask or Always Connect and press to
connect with the device.
7. Once connected, you will see the device listed in
the Bluetooth
®
Menu and the Bluetooth
®
device
connected icon will show up on your
enunciator when connected to the Bluetooth
®
device. You can also check out the connection
with a blue icon on the list.
Icon Reference in Adding New Device
When the Bluetooth
®
wireless connection is built
and paired devices are found, the following icons
are displayed.