Filter
Top Products
QUICK REFERENCE GUIDE
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2009, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
Change Handset Language
• Press to enter main menu.
• Select SETTINGS.
• Select SYSTEM SETTINGS.
• Enter your PIN code (Default is 0000) and press .
• Select LANGUAGE.
• Select the desired language and press .
Transfer a Call - Unsupervised
• While on a call, select press HOLD. The current call is placed on hold.
• Press OPTIONS and then select TRANSFER.
• Dial the extension of the transfer destination.
• Press or .
Transfer a Call - Supervised
• While on a call, press HOLD. The current call is placed on hold.
• Dial the extension of the transfer destination.
• Press or .
• Wait until the called party answers, announce the transfer.
• Press OPTIONS and then select TRANSFER.
Check Call Log
• From idle mode, press CALL LOG.
• Select the type of calls: Missed, Incoming, Outgoing, or All Calls.
• Select the call.
• Press .
About Feature Access Codes
You can dial codes to activate Call Forwarding features and Do Not Disturb. The feature
access codes provided in this guide are the default system codes.Your system may be
programmed with different codes. Contact your System Administrator to obtain the codes
assigned for your system.
Note that when your handset is programmed in a personal ring group (that is, twinned to your
desktop phone) Call Forwarding feature access codes are not supported from your handset.
Forward a Call
Note that when call forwarding active, there is nothing on the handset that indicates it is
enabled. To program and activate Call Forward:
• Dial the appropriate Call Forward Feature Access code followed by the destination
number. Note that the following are default codes. Your system may use different codes.
Contact your System Administrator for a list.
-Always: ∗68
- Busy: ∗61
- No Answer: ∗68
- Cancel All Forwarding ∗70
• Press or .
• Press .
To cancel Call Forward:
• Dial the Cancel All Call Forward Feature Access code (Default code is ∗70)
• Press or .
• Press .