Nokia 1110 Cell Phone User Manual


 
29Copyright © 2006 Nokia. All rights reserved.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will
help you protect your warranty coverage.
Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before
replacing it.
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the
device and damage electronic circuit boards.
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and prevent proper operation.
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could
damage the device and may violate regulations governing radio devices.
Use chargers indoors.
Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a
service facility.
All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility for service.