Nokia 1202 Cell Phone User Manual


 
Get started
Open the back cover
Press the release button (1), slide the back cover upwards (2), and remove it.
This phone is intended for use with the BL-4C battery.
Safe removal. Always switch the device off and disconnect the charger before removing
the battery.
Insert the SIM card and battery
1 Lift the battery, and remove it (1).
2 Insert the SIM card (2). Ensure that the gold-coloured contact area is facing down
and the SIM card is inserted with the bevelled corner facing the bottom of the device.
3 Replace the battery and back cover (3, 4).
Remove the SIM card
Press the release spring (1) and slide out the SIM card (2).
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1 Connect the charger to a wall outlet.
4Get started