Filter
Top Products
Settings
43
Automatic keyguard — to lock the keypad automatically after a preset time delay
when the phone is in the standby mode and no function of the phone has been
used. Select On, and set the time.
Welcome note — to write the note that is shown when the phone is switched on
Flight query > On — The phone asks every time when it is switched on whether the
flight profile shall be used. With flight profile all radio connections are switched
off. The flight profile should be used in areas sensitive to radio emissions.
Phone updates — to receive phone software updates from your service provider
(network service dependency). This option may not be available, depending on
your phone. See “Phone software updates,” p. 45.
Operator selection > Automatic — to set the phone to automatically select one
of the cellular networks available in your area. With Manual you can select a
network that has a roaming agreement with your service provider.
Confirm SIM actions — See “SIM services,” p. 65.
Help text activation — to select whether the phone shows help texts
Start-up tone > On — The phone plays a tone when it is switched on.
■ Enhancements
This menu or the following options are shown only if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and depending
on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer
is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on
for 15 seconds after a key press.
TTY/TDD > Use TTY > Yes — to use the text phone settings instead of headset or
loopset settings
■ Configuration
You can configure your phone with settings that are required for certain services
to function correctly. Your service provider may also send you these settings. See
“Configuration settings service,” p. 10.