Filter
Top Products
Tools
70
Light time-out — to set the time-out for the phone backlights
Call
Select Menu > Tools > Settings > Call and from the following options:
Send my caller ID (network service) — to set your phone number to be
displayed (Yes) or hidden (No) from the person whom you are calling.
The value may be set by your network operator or service provider when
you subscribe to the service (Set by network).
Call waiting (network service) — to set the network to notify you of a
new incoming call while you have a call in progress. To request the
network to activate call waiting, select Activate. To request the network
to deactivate call waiting, select Cancel. To check whether the function
is active, select Check status.
Reject call with SMS — to enable rejecting phone calls with a text
message. See “Answer or reject a call,” p. 25.
Message text — to enter a text to be sent when you reject a call with a
text message
Automatic redial — to set the phone to make a maximum of 10 attempts
to connect the call after an unsuccessful call attempt. Press the end key
to stop automatic redialing.
Summary after call — to set the phone to briefly display the approximate
duration of the last call
Speed dialling > On — to set the phone to dial the numbers assigned to
the speed dialing keys 2 to 9 by pressing and holding the corresponding
number key
Anykey answer > On — to answer an incoming call by briefly pressing
any key, except the right selection key, the power key, volume keys, the
push to talk key, and the end key
Line in use (network service) — this setting is shown only if the SIM card
supports two subscriber numbers, that is, two phone lines. Select which
phone line (Line 1 or Line 2) you want to use for making calls and
sending short messages.