Filter
Top Products
Connectivity
97
Log in to push to talk
Select Menu > Connect. > PTT, or press the push to talk key. Push to
talk automatically logs in to the service when started.
When log in is successful, push to talk automatically connects to
channels that were active when the application was last closed. If the
connection is lost, the device automatically tries to log back in until you
exit push to talk.
indicates a push to talk connection.
indicates that push to talk is set to do not disturb (DND).
Exit push to talk
Select Menu > Connect. > PTT > Options > Exit. Switch push to talk off
after exiting application? is displayed. Select Yes to log out and close the
service. If you want to keep the application active in the background,
select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
1. Select Menu > Connect. > PTT > Options > PTT contacts, scroll to
the contact you want to talk to, and press the push to talk key.
2. When the connection has been established, to talk to the other
participant, press and hold the push to talk key the entire time you
are talking.
Select Options > Deactivate loudsp./Activate loudspeaker to use the
earpiece or loudspeaker for push to talk communication.
3. To end the PTT call, select Disconnect, or if there are several PTT calls,
select Options > Disconnect.
Answer a push to talk call
If Incoming PTT calls is set to Notify in User settings, a short tone notifies
you of an incoming call. To accept the call, select Accept. To silence the
tone, select Silence. To reject the call, press the end key.