Nokia 6131 Cell Phone User Manual


 
29Copyright © 2006 Nokia. All rights reserved.
If an application is sending or receiving data using a packet data connection, end the application before you
use voice dialing.
Voice commands are language-dependent. To set the language, see Voice playback language in Phone p. 74.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or press and hold the volume down key. A short
tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the headset key to start the voice
dialing.
2. Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The
phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials
the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice
commands in My shortcuts p. 65.
Answer or reject a call
To answer an incoming call, press the call key, or open the phone. To end the call, press the end key or close the
phone.
To reject an incoming call if the phone is open, press the end key. To reject an incoming call when the phone is
closed, press and hold a volume key.
To mute the ringing tone, press a volume key when the phone is closed, or select Silence when the phone is
open.
Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox),
rejecting an incoming call also diverts the call. See Call p. 72.