Filter
Top Products
OR
If 1-touch dialing is set to On, press and hold a number key until the call begins.
Further details are described in 1-touch dialing. See "Call," p. 53.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the device.
Voice commands are language-dependent. Set the Recognition lang. before
using voice dialing. See "Phone," p. 54.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key or the volume
down key. A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice
recognition is successful, a list with matches is shown. The device plays the
voice command of the first match on the list. If it is not the correct command,
scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice
dialing. See "Voice commands," p. 48.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end
key.
To reject an incoming call, press the end key. To mute the ringing tone, select
Silence.
To answer a waiting call during an active call (network service), press the call
key. The first call is put on hold. To end the active call, press the end key. You
may also activate the Call waiting function. See "Call," p. 53.
Call functions
25
file:/D:/temp/overmode/GUID-93E4144F-99DB-448A-A2D4-C4B82217C9F9.en.200704042003218121175706477381/en/1/GUID-B9155A85-4BCC-49F2-
A60D-2EE349C2E3A6.xml Page 25 Apr 4, 2007 8:08:30 PM