Filter
Top Products
8
Display 7 – System information bits for serving cell
++++++++++++++ ##############
+E A H C I BR+ #Serving Cell#
+a b c d e fg+ #System Info #
+ECSC 2Ter MB+ #Bits #
+ h i j+ # #
++++++++++++++ ##############
a 1 is shown if emergency calls are supported
b 1 is shown if attach-detach-procedure is allowed
c 1 is shown if half rate channels are supported
d 1 is shown if C2 values are broadcasted
e 1 is shown if system information 7 and 8 are broadcasted
f 1 is shown if cell broadcast is supported
g 1 is shown if re-establishment is supported
The following items are used only in dualband phones:
h In idle mode 1 is shown if Early Classmark (ECSC) sending is supported.
In dedicated mode (conversation) X is shown.
i In idle mode 1 is shown if 2Ter messages are supported.
In dedicated mode (conversation) X is shown.
j MultiBand reporting decimal value (0,1,2,3) is shown if supported.
This is shown both in idle and dedicated mode.
The following is picked from Phase2+ ETSI ETS 300578 (TS GSM 05.08), Section 8.4.3
"Additional cell reporting requirements for multi band MS".
For a multi band MS the number of cells, for each frequency band supported, which
shall be included in the measurement report is indicated by the parameter,
MULTIBAND_REPORTING. The meaning of different values of the parameter is specified as
follows:
Value Meaning
00 (0) Normal reporting of the six strongest cells, with known and allowed NCC part
of BSIC, irrespective of the band used.
01 (1) The MS shall report the strongest cell, with known and allowed NCC part of
BSIC, in each of the frequency bands in the BA list, excluding the frequency
band of the serving cell. The remaining positions in the measurement report
shall be used for reporting of cells in the band of the serving cell. If
there are still remaining positions, these shall be used to report the next
strongest identified cells in the other bands irrespective of the band used.
10 (2) The MS shall report the two strongest cells, with known and allowed NCC part
of BSIC, in each of the frequency bands in the BA list, excluding the
frequency band of the serving cell. The remaining positions in the
measurement report shall be used for reporting of cells in the band of the
serving cell. If there are still remaining positions, these shall be used to
report the next strongest identified cells in the other bands irrespective
of the band used.
11 (3) The MS shall report the three strongest cells, with known and allowed NCC
part of BSIC, in each of the frequency bands in the BA list, excluding the
frequency band of the serving cell. The remaining positions in the
measurement report shall be used for reporting of cells in the band of the
serving cell. If there are still remaining positions, these shall be used to
report the next strongest identified cells in the other bands irrespective
of the band used.