Filter
Top Products
Copyright. 1998. Nokia Mobile Phones. 2(3)
Figure 4: Installing applications.
8. Your PC is now installing files to your Windows CE device.
Figure 5: Installing files.
9. Now file installation is ready. Click OK.
Figure 6. File installation complete.
Some additional steps are required in your Windows CE device:
10. Disconnect your Windows CE device from PC.
11. Open Start - Programs and run Reg8810 software in Win CE device.
12. First you will see the IrDA update window: "This Program Updates
registry for IrDA connection on COM3 or on first unused COM-port above COM4: (autoscan) it will
make you able to use infrared connection to the Nokia 8810 cellular phone".
13. Click COM3 (or Autoscan).
14. Wait a few seconds. You will see the IrDA Update window: "Infrared port is now COMx:. Please,
reset (boot) your handheld PC next". Remember this number COMx for further usage.
15. Reset your CE device. Refer your Windows CE device User Guide for more information.
Now you have new communication port "Nokia Phone on Infrared Port". Use this modem in all
applications.
16. Test driver functionality. You can use for example remote networking.
- If you have problems with autoscan run reg8810 again and select COM3.
Note: You must activate infrared connection in Nokia 8810 phone every time you want to use it. You will
see the flashing infrared sign on the phone when it is waiting for infrared connection and stationary
infrared sign on the phone when connection is active.
2. PRACTICAL HINTS & TROUBLESHOOTING:
There are significant differencies in the power supply capability of
different brands/models of Microsoft Windows CE 2.0 compatible PC's.
Nokia takes no responsibility of possible damages caused by the
operating current drain for Infrared. Consult your handheld PC
dealer for information on the power supply issues relevant to infrared device usage.