Filter
Top Products
Copyright. 1998. Nokia Mobile Phones. 3(4)
1.3.1 Making a dial-up connection
1. From Extras select Web. If the web browser will not start and Psion tells you something is wrong in
configuration, follow the instructions Prion gives you on the screen.
2. From Web window you will see down below the place where you should write the URL you want to
visit. After you have written the URL press Enter from keyboard. On the screen should appear a pop-
up window Connect to Internet.
3. Check that the connection settings are correct. The modem is the one that uses 8810 and phone
number is also correct.
4. Before pressing OK check that Ir-link is active in your 8810. Please remember that there is a 120
second timeout in the 8810 IR port to save battery power. If the link is not active, do activate it from
the 8810 keyboard by pressing Menu – 9. If the link is active press OK in Psion.
Psion should be now looking up the host address you have chosen. When you want to quit browsing
choose file from menubar and from there disconnect from network. After that you can close the Web
browser (file – close).
1.4 Psion 5 Comms (terminal) connection configuration
When you are using only terminal you will not need to download Message Suite.
1. Press system
2. Open menu – tools – remote link…
3. Select off and press OK
4. Press Extras
5. Select Comms
6. Open menu – tools – communication settings
7. Select: Use comms port: infrared
8. Select OK.
Now you should see "Online" in right upper corner.
9. Activate the Ir-link from your 8810.
10. Type AT and press "Enter". Now you should have active infrared connection and you can give AT
commands.
1.5 Message suite configuration
1. Select Extras
2. Select Email
3. Set your email settings: Menu – Tools- Settings - Email…
4. Set your Fax settings: Menu – Tools – Settings - Fax…
Now you can send and receive email and fax messages.
Create new email or fax
When you have finished your message select "Done (put in outbox)".
1. Open local outbox
2. Select send
3. Select Send faxes or Send email
4. Send Fax
4.1 You will see "connect" dialogue. Check that Fax number, Location and Modem (Nokia 8810) are
correct.
4.2 Press "Menu – 9" in Nokia 8810 phone - This will activate infrared reception. You have 120
seconds to start sending.
4.3 Click OK in Psion 5 dialogue