Filter
Top Products
Copyright. 1999. Nokia Mobile Phones. 3(4)
4. Before pressing OK check that the Ir-link is active in your Nokia 8850. If the link is not active, activate
it from the Nokia 8850. If the link is active press OK in the Psion.
Psion should now be looking up the host address you have chosen. When you want to quit browsing
choose File from the menu bar and from there Disconnect from the Network. After that you can close the
Web browser (file – close).
1.4 Psion 5 Comms (terminal) Connection Configuration
When you are using only a terminal you will not need to download Message Suite.
1. Press system
2. Open menu – tools – remote link…
3. Select off and press OK
4. Press Extras
5. Select Comms
6. Open menu – tools – communication settings
7. Select: Use comms port: infrared
8. Select OK.
Now you should see "Online" in the right upper corner.
9. Activate the Ir-link from your Nokia 8850.
10. Type AT and press "Enter". Now you should have an active infrared connection and you can give AT
commands.
1.5 Message Suite Configuration
1. Select Extras
2. Select Email
3. Set your email settings: Menu – Tools- Settings – Email…
4. Set your Fax settings: Menu – Tools – Settings - Fax…
Now you can send and receive email and fax messages.
Create new email or fax
When you have finished your message select "Done (put in outbox)".
1. Open local outbox
2. Select send
3. Select Send faxes or Send email