Filter
Top Products
Call functions
24
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialling
in all circumstances.
1. In the standby mode, press and hold the right selection key or press
and hold the volume down key. A short tone is played, and Speak now
is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialling.
2. Say the voice command clearly. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of
the match on the top of the list. After about 1.5 seconds, the phone
dials the number. If the result is not the correct one, scroll to another
entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialling. See Voice commands in My shortcuts p. 56.
■ Answer or reject a call
To answer an incoming call, press the call key, or open the phone. To end
the call, press the end key or close the phone.
To reject an incoming call, press the end key, or select Silence > Reject.
To mute the ringing tone, select Silence.
Tip: If the Divert if busy function is activated to divert the calls
(for example, to your voice mailbox), rejecting an incoming call
also diverts the call. See Call p. 62.
If a compatible headset supplied with the headset key is connected to
the phone, to answer and end a call, press the headset key.
Call waiting
To answer the waiting call during an active call, press the call key. The
first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see Call p. 62.