Filter
Top Products
Nokia D211 features
35
© Nokia Corporation 2004. All rights reserved.
To set the call diverts:
1 On the Settings page, select the GSM tab and click Advanced Settings.
2 The Advanced GSM Settings dialog box opens. Select the Call Divert tab.
3 From the Call type list, select the call type you want to be diverted (voice,
data, or fax).
4 Click Check Status to check whether the divert is activated or not. To set the
divert setting on, click Change.
5 Select where you want to direct your incoming calls and type the phone
number. Click OK.
6 Click OK to apply the settings and to close the dialog box.
To cancel all the active call diverts at once, click Cancel All Diverts.
To cancel only one call type divert, click Change and select Deactivate in the
Divert to list.
Note: Make sure you have either the GSM or GPRS connection type selected
when setting call diverts or checking the status. When connected to WLAN,
you cannot configure these settings.
Call Barring
Call barring is a network service that allows you to restrict incoming and outgoing
calls so that calls cannot be received or made.
Activating call barring or changing the barring settings requires the barring
password, which you obtain from your service provider or network operator. See
“To change access codes” on page 38 for information on how to change the
barring password.
To set call barring options:
1 On the Settings page, select the GSM tab and click Advanced Settings.
2 The Advanced GSM Settings dialog box opens. Select the Call Barring tab.
3 From the Call type list, select the call type you want to bar (voice, data, fax, or
messages).
4 Click Check Status to ask the network for the call barring status. To set a
barring setting on, click Activate.
5 Type your barring password and click OK.
6 Click OK to apply the settings and to close the dialog box.
To disable all call barrings, click Cancel All Barrings. To disable only one call type
barring, click Deactivate.
Note: Make sure you have either the GSM or GPRS connection type selected
when setting call barring options or checking the status. When connected to
WLAN, you cannot configure these settings.