Filter
Top Products
E-mail support
5
Copyright © 2006 Nokia. All rights reserved.
1 To edit the settings for received e-mail, select
Connection settings
→ Incoming e-mail and from the
following settings:
• User name — Enter the user name for your e-mail
account as given to you by your e-mail service
provider.
• Password — Enter your password as given to you by
your e-mail service provider. If you leave this field
empty, you will be asked your password when you try
to connect to your mailbox.
• Incoming mail serv. — Enter the IP address or host
name of the server that receives your e-mail.
• Access point in use — Select the Internet access point
that the device uses for retrieving the e-mail
messages that you receive.
• Mailbox name — Enter a name for the mailbox.
• Mailbox type — Select the mailbox protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting can be
selected only once and cannot be changed if you
have saved or exited from the mailbox settings. If
you use the POP3 protocol, e-mail messages are not
updated automatically when you are online. To see
the latest e-mail messages, you must disconnect and
make a new connection to your mailbox.
• Security (ports) — Select the security option used to
increase the security of the connection.
• Port — Define a port for connection.
• APOP secure login (for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
Press Back to save your settings.
2 To edit the settings for sent e-mail, select Outgoing
e-mail and from the following settings:
• My e-mail address — Enter the e-mail address given
to you by your service provider. Replies to your
messages are sent to this address.
• User name — Enter the user name for your e-mail
account as given to you by your e-mail service
provider.
• Password — Enter your password as given to you by
your e-mail service provider. If you leave this field
empty, you will be asked your password when you
try to connect to your mailbox.
• Outgoing mail serv. — Enter the IP address or host
name of the e-mail server that sends your e-mail.
You may only be able to use the outgoing server of
your network operator. Contact your service
provider for more information.
• Access point in use — Select the Internet access point
that the device uses for sending the e-mail
messages that you send.
• Security (ports) — Select the security option used to
increase the security of the connection.
• Port — Define a port for connection.
Press Back twice to save your settings and return to
the main e-mail settings page.
3 To edit user settings, select User settings and from the
following settings:
Nokia_E62_E-mail_support_en_1.fm Page 5 Thursday, July 13, 2006 12:50 PM