Filter
Top Products
Copyright
©
2005 Nokia. All rights reserved.
Tools
103
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the PUK
code in this section.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones. The UPIN code
protects the USIM card against unauthorized use.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
Glossary: Digital certificates are used to verify the
origin of the XHTML or WML pages and installed
software. However, they can only be trusted if the
origin of the certificate is known to be authentic.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.