Filter
Top Products
Connectivity
Show my PTT address
—Select In 1 to 1 calls
, In group
calls
, In all calls, or Never
. Your service provider may have
disabled some of these options in your device.
Show my login status
—Select Yes if you want your status
to be shown or No
if you want your status to be hidden.
Select
Connection settings
, and enter the following
information:
Domain
—Enter the domain name obtained from your
service provider.
Access point name
—Enter the push-to-talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
Server address
—Enter the IP address or domain name of
the push-to-talk server ob
tained from your service
provider.
User name—Enter your user name obtained from your
service provider.
PTT password
—Enter a password, if required, to make a
data connection. The password
is usually provided by the
service provider and is often case-sensitive.
Log in to push to talk
Press , and select Connect.
> Push to talk
. Push to talk
automatically logs in to
the service when started.
When log in is successful,
push to talk automatically
connects to channels that were active when the
application was last closed. If
the connection is lost, the
device automatically tries to log back in until you choose
to exit push to talk.
Exit push to talk
Press , and select
Connect. > Push to talk
>
Options
> Exit.
Switch Push to talk off after exiting
application?
is displayed. Select
Yes to log out and close
the service. Select
No
if you want to k
eep the application
active in the background. If
several applications are open
and you want to switch from
one application to another,
press and hold .
Make a one-to-one call
Select Options
> PTT contacts
.
Select the contact you want to
talk to from the list and
select Options
> Talk 1 to 1
.
Press and hold the entire time you are talking. When
you have finished talking, release .
9240621_Rolf_booklet.book
Page 11 Tuesday, Janu
ary 16, 2007 1:56 PM
Copyr
ight © 2006 Nokia.
All
rights
reser
v
ed.
11