Filter
Top Products
Camera
14
Copyright © 2007 Nokia. All rights reserved.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—Select On to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select Off.
Capture tone—Select the tone you want to hear when
you take a picture.
Memory in use—Select where to store your images.
Restore camera settings—Select OK to return the default
values to the camera settings.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions.
The following flash modes are available for the still
image camera: Automatic (), Red eye reduct. (),
On (), and Off ().
To change the flash mode, in the active toolbar, select the
desired flash mode.
Setup settings—Adjust color and
lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Exposure compensation (images only)—Adjust the
exposure time of the camera.
Colour tone—Select a color effect from the list.
Light sensitivity (images only)—Select the light sensitivity
of the camera. The darker the environment, the higher the
light sensitivity should be.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings affect both the cameras; if you change
the settings in the secondary camera, the settings in the
main camera change too. The setup settings return to the
default settings when you close the camera.