Connections
90
Copyright © 2007 Nokia. All rights reserved.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired
device. Devices with Bluetooth wireless technology
within range start to appear on the display. Select the
device, and enter the passcode. The same passcode must
be entered on the other device as well. After pairing, the
device is saved to the paired devices view.
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select Options, and from the following:
Set as authorised—Connections between your device
and this device can be made without your knowledge.
No separate acceptance or authorization is needed.
Use this status for your own devices, such as your
compatible headset or PC, or devices that belong to
someone you trust. indicates authorized devices in
the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings,
select Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is
removed immediately, and the connection to the
device is switched off.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity,
a tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated
by . See “Inbox—receive messages”, p. 55.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.