Filter
Top Products
76
When the phone is charging, no lights are displayed on the
stand; check the charging status of the phone battery on
the phone display.
Note: If you have attached an optional analog module, be
sure to remove it and replace the battery before placing the
phone in the charging stand. Although the phone will fit in
the stand with the analog module attached, charging will
not take place.
Charging moves to the rear slot once the front battery is
100% charged.
When the spare battery is charging, check the status
indicator on the left side of the charging stand. A red light
indicates that the battery is charging; a green light
indicates that the battery is charged to at least 80% of its
capacity.
The phone has the built-in intelligence to maintain the
battery, so there is no need for a discharge feature on the
stand.
DCH-9 Rear Slot Charging Times
Battery option
Using ACP-7U Using ACP-9U
Front
slot
empty
Front
slot
full
Front
slot
empty
Front
slot
full
BLS-2 Extended
Li-Ion 900 mAh
6 hrs.
30 min.
8 hrs.
30 min.
4 hrs.
30 min.
5 hrs.
30 min.
BMS-2S Extended
NiMH 900 mAh
BMS-2V Extended
NiMH Vibra 900 mAh
BLS-4 Ultra Extended
Li-Ion 1500 mAh
12
hrs.
15 hrs.
45 min.
8
hrs.
10 hrs.
30 min.