Filter
Top Products
©2001 Nokia Corporation. All rights reserved.
Menu functions
81
Menu functions
The following options depend on the selected data bearer:
When GSM data is the selected data bearer:
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press for a period, and press OK. You obtain the IP address
from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analogue or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic. Automatic is available
only if the current selected data call type is Analogue. The actual data call speed depends on the
service provider.
• Login type - Select Manual or Automatic. If you select Automatic, the login type uses the user
name and password keyed in the following settings. If you select Manual, the login information
is required when establishing a connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
When GPRS is the selected data bearer:
• GPRS connection - Select Always online or When needed.
If you select Always online, the GPRS connection is automatically established when you switch
on the phone. The indicator is shown on the display in standby mode. The GPRS connection is
not closed when you end a WAP connection.
If you select When needed, the GPRS connection is established when you connect to a WAP
service and closed when you end the WAP connection.