Filter
Top Products
Menu functions
119
Copyright
2003 Nokia. All rights reserved.
Settings when GPRS is the selected data bearer
• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network.
You obtain the access point name from your network operator or service
provider.
• IP address - Key in the address, press for a dot , and press OK. You obtain
the IP address from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Login type - Select Manual or Automatic. If you select Automatic, the login
type uses the user name and password keyed in the following settings. If you
select Manual, the login information is required when establishing a
connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you want to use are
activated. To activate the settings:
• Press Menu, and select Services and Settings. Select Active service settings and
scroll to the set you want to activate and press Activate.