Filter
Top Products
General information
15
Copyright
© 2004 Nokia. All rights reserved.
■ Access codes
Security code (5 to 10 digits)
The security code helps to protect your phone against unauthorised use. The pre-
set code is 12345. Change the code, and keep the new code secret and in a safe
place separate from your phone. To change the code, and to set the phone to
request the code, see Security settings on page 115.
If you key in an incorrect security code five times in succession, the phone ignores
further entries of the code. Wait for 5 minutes and key in the code again.
PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN
• The PIN (Personal Identification Number) code helps to protect your SIM card
against unauthorised use. The PIN code is usually supplied with the SIM card.
Set the phone to request the PIN code each time the phone is switched on, see
Security settings on page 115.
• The PIN2 code may be supplied with the SIM card and is required to access
some functions, such as call counters.
• The module PIN is required to access the information in the security module.
See Security module on page 153. The module PIN is supplied with the SIM
card if the SIM card has a security module in it.
• The signing PIN is required for the digital signature. See Digital signature on
page 155. The signing PIN is supplied with the SIM card if the SIM card has a
security module in it.