Filter
Top Products
81Copyright © 2005 Nokia. All rights reserved.
When you start an application using (E)GPRS, the connection between the
phone and the network is established, the indicator is shown and data
transfer is possible. When you end the application, the (E)GPRS connection is
terminated but the registration to the (E)GPRS network remains.
If you receive a call or a text message, or make a call during a (E)GPRS
connection, the indicator will be shown on the top right of the display to
indicate that the (E)GPRS connection is suspended (on hold).
Note that GPRS and EGPRS are not indicated separately, the indicators for
GPRS and EGPRS are the same.
Note that your phone supports three simultaneous (E)GPRS connections. For
example, you can simultaneously browse xHTML pages, receive multimedia
messages and have an ongoing PC dial-up connection.
(E)GPRS modem settings
You can connect the phone via Bluetooth wireless technology and infrared to a
compatible PC and use the phone as a modem to enable (E)GPRS connectivity
from the PC.
To define the settings for (E)GPRS connections from your PC, press Menu, and
select Settings, Connectivity, GPRS and GPRS modem settings.
• Select Active access point and activate the access point that you want to use.
• Select Edit active access point to change the access point settings.
• Select Alias for access point. Enter the name you would like for the
activated access point and press OK.
CLEAN_Jinx_web_en2.fm Page 81 Monday, January 24, 2005 3:51 PM