Filter
Top Products
End a Bluetooth connection
A Bluetooth connection is disconnected automatically after sending or receiving data. Only Nokia PC Suite and some
enhancements may maintain a connection even if not actively used.
Remote SChip mode
When the wireless device is in the remote SChip mode, you can only use a compatible connected enhancement, such as a car
kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into
your device, while in this mode. To make calls from your device, you must first leave the remote SChip mode. If the device has
been locked, enter the code to unlock it first.
With remote SChip mode, you can access the SmartChip of your device from a compatible car kit device. This way, you do not
need a separate SmartChip to access SmartChip data and connect to the GSM network.
To use remote SChip mode, you need the following:
• Compatible car kit device that supports Bluetooth wireless technology
• Valid SmartChip in your device
For more information about car kit devices and compatibility with your device, see www.nokia.com and your car kit user guide.
Manage remote SChip mode
1. Select Menu > Settings > Bluetooth to activate Bluetooth connectivity in your device.
2. To enable remote SChip mode, scroll to Remote SChip mode, and press the joystick.
3. Activate Bluetooth in the car kit device.
4. Use your car kit device to start a search for compatible devices. For instructions, see the user guide of your car kit device.
5. Select your device from the list of compatible devices.
6. To pair the devices, enter the Bluetooth passcode shown on the display of the car kit device to your device.
7. Authorize the car kit device. Select Menu > Settings > Bluetooth, and scroll to the Paired devices page. Scroll to the car kit
device, and enter the Bluetooth passcode. When the device asks to make the connection automatic, select Yes. Connections
between your device and the car kit device can be made without separate acceptance or authorization. If you select No,
connection requests from this device must be accepted separately every time.
Tip: If you have already accessed the SmartChip from the car kit with the active user profile, the car kit searches
automatically for a device with the SmartChip. If it finds your device, and automatic authorization is activated, the car
device automatically connects to the GSM network when you switch on the car ignition.
When you activate the remote SChip mode, you can use applications on your device that do not need network or SmartChip
services.
To end the remote SChip mode connection from your device, select Menu > Settings > Bluetooth > Remote SChip mode > Off.
Infrared
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser
product.
Use infrared to connect two devices and transfer data between them. With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible device.
Send and receive data
1. Ensure that the infrared ports of the devices face each other. The positioning of the devices is more important than angle or
distance.
2. Select Menu > Settings > Infrared, and press the joystick to turn on infrared on your device. Turn on infrared on the other
device.
3. Wait a few seconds until an infrared connection is established.
4. To send, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.
If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be
started again.
All items received through infrared are placed in the Inbox folder in Messag..
Positioning devices away from each other breaks a connection, but the infrared light beam remains active on your device until
it is deactivated.
Cable connection
Install the USB data cable driver to your PC before you use a cable connection. Verify that the driver has been installed after PC
Suite installation. If the driver is not properly loaded, you must uninstall and then reinstall PC Suite.
C o n n e c t i v i t y
Copyright © 2006 Nokia. All Rights Reserved. 63