Filter
Top Products
Page 5 Enterprise Edge M7310 Quick Reference Guide
Setting up the telephone
Connecting the cords
ATTENTION
Before attempting to carry
out
any
work on the telephone, ensure
that the line cord is unplugged from the
wall socket.
To remove any of the cords, squeeze the
release latch on the plug and gently pull
the plug from the socket.
Connect the handset cord to the jack
labelled with the telephone icon and route
the cord as shown.
If you are using a headset, route the cord
along the channel in the base and connect
the cord to the telephone jack that is
marked with the headset icon.
Route the line cord through the stand and
connect the cord to the telephone jack that
is marked with the jack icon.
Attach the stand using the slots on the
back of the telephone.
Once the above work is complete, plug the
line cord back into its wall socket.
Connect to jack
from distribution block
Connect to receiver