Filter
Top Products
Fitting the Battery
Fit a fully charged battery pack. If the
battery pack is not fully charged then it
must be charged as described in the
“Charging the Battery” section.
First, remove the battery cover by
pressing where indicated and sliding
the cover downwards (1). Ensure that
the battery locking mechanism is
located to the left, then insert the top of
battery (label uppermost) into the
battery recess (2). Place the base of the
battery into the phone and push the
sliding mechanism to the right locking
the battery into place (3). Replace the
battery cover, sliding upwards until it clicks into position (4).
Removing the Battery
First, remove the battery cover by
pressing where indicated and sliding
the cover downwards (1).
Push the sliding mechanism to the left
to release the battery (2). The battery
can now be removed from the phone
(3).
Charging the Battery
Connecting the AC
Adaptor
The battery pack must be attached to
the phone before the AC Adaptor is
connected. Insert the AC Adaptor plug
into the base of the phone (1).
Note: DO NOT force the connector as
this may damage the phone and/or the
AC Adaptor.
Connect the AC Adaptor to the mains power supply (2). Indicator will light and
charging starts.
2
Getting Started