Filter
Top Products
Main menu: “Key Finder”
*7
Sub-menu 1 Sub-menu 2 Settings Code
Search
– – #655 –
Battery Check
– –
Main menu: “Caller Barred”
*2, *19
Operation Code
Storing/Viewing bar call numbers. #217 27
*1 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*4 If you select the unit’s region setting (page 30) to “Česká rep.” or “Slovensko”, the
default setting will be changed for the selected country.
*5 If you select the unit’s region setting (page 30) to “Česká rep.” or “Slovensko”, the
default setting is “On”.
*6 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*7 This setting is available when you have the key finder (KX-TGA20FX). Read the installation
manual for more information on the key finder.
*8 For models with supplied key finders, the display shows “1:Finder1”.
*9 If you register 2 or more key finders.
*10 If you have 2 or more key finders.
*11 Wallpaper is displayed in the standby mode only when you select “Digital(Small)” or
“Off” for this setting.
*12 You can select to display either a single item or multiple items on one screen at a time for
the handset main menu icons in function menu, phonebook list, caller list, and redial list.
*13 You can set the handset display backlight while on charge.
– “On”: Backlight is on (dimmed).
– “Off”: Backlight turns off after 10 seconds of charging.
*14 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*15 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*16 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 30):
“Česká rep.” = “100 msec.”
“Slovensko” = “100 msec.”
*17 To prevent other users from joining your conversations with outside callers, turn this feature
on.
25
Programming
PRS110FX(en)_0725_ver020.pdf 25 2013/07/25 9:56:12